|
Our laboratory audiometric calibration system is based around an ADACS system. This system can calibrate any type of audiometer from a hand-held screening device to a fully featured clinical instrument. A detailed calibration certificate is provided which tabulates all of the measurements made - both before and after any adjustments. The parameters measured are: Frequency, Sound Pressure Level, Force Level, Narrow-Band Masking Level, Distortion and Attenuator Linearity.
Tympanometers are calibrated in a similar manner to audiometers with additional measurements made on the pressure and compliance sections of the instrument.
All types of Hearing Instrument Test boxes can be calibrated and the parameters tested are: Frequency, Sound Pressure Level, Distortion and Linearity.
Evoked Response Audiometers are calibrated with reference to the manufacturer’s specifications. The pure tone section of the instrument is calibrated in a similar manner to an audiometer while the click amplitude is measured as a peak equivalent SPL.
Oto-Acoustic Emission equipment is calibrated to the manufacturer’s specifications. This will be based on the calibration of the probe transducers utilising a probe and measurement coupler configuration specified by the manufacturer.
|
